86-0577-86078986
No. 2, Daqing Road, Xinqiao Street, Ouhai District, Wenzhou, Zhejiang, China (Mainland)
Windproof Electronic Ignitor/ Usb External Power Bank For Mobile , Find Complete Details about Windproof Electronic Ignitor/ Usb External Power Bank For Mobile,Electronic Ignitor,Power Bank For Mobile,Power Bank For Smartphone from Starters Supplier or Manufacturer-Wenzhou Shengbo Technology Co., Ltd.
1.Electric lighter for outdoor camping
2.USB emergency power pack
3.High power LED flashlight
Windproof Electronic Ignitor/ USB External Power Bank for Mobile
This product is a portable power bank with ignitor that has four function into one set: supply power,charge,lighting and ignite. It consists of 2000mAh lithium batteries (renewable) as a storage unit, it can charge all kinds of digital products (such as mobile phone, MP4, etc.).
The push button switch of ignitor: Firstly,pushing the switch to the right, and pushing the button of switch to the top, next the heating wire will fever, then loosen the push button, the heating wire will out. The operation is very convenient.
1. we could provide samples within 4 days, except special states.
2.Customized samples is available.
3. Available OEM
4.1 year quality wattanty service.
PRODUCT DETAILS
*USB port and mini USB port integrated at the bottom of item: USB port for output the power; Mini USB port for input the power with adaptor (optional)
*The inside battery using indicator*
*Inside battery compartment, it's rechargeable Lithium.
TECHNICAL PARAMETERS
ITEM | PARAMETER | UNIT |
Fully charged time of ignitor (10S each time) | ≥200 | Time |
The fully time of the external(5V 500MA) Charge internal battery | 8±0.5 | Hour |
The USB rated output voltage | 5V±0.2 | V |
The Max load current | 400-600 | MA |
The Max flux after the fully charge | ≥4 LM | LM |
The lighting time after fully charge(put 100Mlm) | about 90 | hour |
Mini USB rated input voltage | DC 5- 5.2 | V |
The static electricity consumption | ≤200 | uA |
Operation method
At first use, replace the battery or disconnect the battery charged again, press the reset button and activate the product function
2. Ignitor
Firstly,pushing the switch to the right, and pushing the button of switch to the top, then the lid will be open, next the ignitordevices will appear, if the middle heating wire light, you can use it. One the contrary, loosen the switch button will be reseted; If you ignite 30 times continuously, please stopped after10 minutes, then you can continue to operate.(When holding on the ignition switch for more than 10 seconds, the ignitor will shut down automatically. Please open after 3 seconds, if ignition is not up to 10 seconds at a time, must shut down after 3 seconds protection, then you can open it again.
3. Charge For Digital Devices:
4. Light For Lighting:
Push the switch button forward two gears, on the contrary, the light off.
5. Power Indication:
Push the switch button forward a gear, the battery indication will on.
CERTIFICATE
PHOTOS about US
